10t Hydraulic Pull-In Winch

Hydraulic pulling winch type T15-100-S9-D-L1

Description

The 10t Hydraulic Pull-In Winch is a hydraulic pulling winch of type T15-100-S9-D-L1 with a long drum. It has a pulling force of 12 000 kg at 10 m/min on the 1st layer and 10 000 kg at 12 m/min on the 4th layer, with 5 layers and a total wire length of 250 m of 12 mm wire. Wire breaking load (MBL) is 430 kN with a wire rope design factor of 3,5.

The winch requires an oil flow of 95 l/min, has a theoretical start pressure of 190 bar and a minimum relief pressure of 23 bar. It has a gear ratio of 76,5, a braking torque of 489 Nm and a 130 cm3/rev motor. Weight exclusive wire is 480 kg.