Explore an extensive range of high-quality products tailored to fulfill your unique requirements.
Misc. ROV Tooling
NOR’s new ROV PEN allows the ROV to adjust the crayon colour sticks subsea. This helps save operational time so the ROV does not have to recover back to deck to retract the crayon when used for subsea marking.
Misc. ROV Tooling
Kystdesign pipetracker hydraulic frame can be mounted on the back or front on the subsea vehicle, can be used on various ROV`s, Trenchers, Excavation machines etc. Mounting brackets can be supplied with, which also have the possibility of integrating Kystdesign camera booms.
Misc. ROV Tooling
Kystdesign survey frame is made to fit various Kystdesign ROVs. It can be fitted with a dual MBES system and other various sensors.
Misc. ROV Tooling
The ROV Gasket Removal Tool is designed to remove and replace the AX and VX type gaskets inside the wellhead.
Misc. ROV Tooling
The AV/AX Ring/Gasket Tool for removal/installation of AX/VX gaskets is a mechanical tool with no requirement for hydraulic or electric supply from an ROV. This gives the operator the option to transport the tool to/from the worksite without recovery of the ROV. Suitable for use with or without tubing hanger installed in the wellhead.
Misc. ROV Tooling
Tool Tec developed a front-mounted, retractable pipe tracker frame suitable for fitment onto a rangeof vehicles. Designed to take the TSS 440 array of coils and mounted in accordance with themanufacturer’s recommendations.
Misc. ROV Tooling
The Tool Basket is specially made for intervention and increases the efficiency of subsea operations. The Tool Basket has pre-installed receptacles, and can be delivered with hot stabs that fit. The hoses connected for the receptacles also has custom made brackets for the JIC fittings. They will not loosen during operation which prevents the fittings from leaking .
Misc. ROV Tooling
The switchable Miko ROV magnet has a fully mechanical on/off function and a holding force of 750 kg when activated.
Misc. ROV Tooling
NOR-DS-Docking Probe-022022 Docking Probe (latch) is used subsea for a variety of purposes; typical examples are for the secure docking of Tooling Deployment Units (TDU) onto subsea hardware, ROV docking onto subsea structures and large surface deployed tooling such as ROV drills. Typically, they are supplied in pairs and mounted at 1050mm centers. The ToolTec Docking Probe has been designed to be the most compact on the market enabling easy mounting as it does not feature an obtrusive hydraulic cylinder mounted on its rear. Not only is it the smallest on the market, it is also the most powerful with a linear push force of 4,000kg which is substantially higher than its closest competitor. The Docking Probe is designed to be “failsafe” meaning that in the event of hydraulic failure it automatically releases, ensuring that a “dead ROV” is not left locked onto subsea hardware. The Docking Probe engages into the subsea receptacle via 3 latches which make 3 points of contact, ensuring both a secure grip into the receptacle and lower contact stresses, both on the tool and receptacle.
Misc. ROV Tooling
Mounts with Schilling HD & UHD 3 frame
Misc. ROV Tooling
The ROV Subsea Marker Pen is an efficient solution when marking of underwater items are required.
Misc. ROV Tooling